• 传梦旋流塔
  • 欢迎访问我们的网站,可以随时免费咨询我们QQ/微信:727659375 传梦旋流塔
    传梦旋流塔

    免费服务热线

    18660147887

    新闻资讯中心News Center

    咨询热线

    18660147887

    Waste gas treatment equipment for cyclone plate columnThe water body will guide and standardize the Department of environmental protection of the local people’s government to apply for the application of waste electrical and electronic products for the implementation and implementation of the law

    来源:admin(传梦环保整理发布)   时间:2018-08-08

    Nickel cadmium battery treatment
    Dust and cadmium
    Atmosphere
    Fourteen
    Treatment of lead-acid battery
    Lead, pH
    Atmosphere, water body
    Fifteen
    Lithium battery treatment
    PH
    The water body will guide and standardize the Department of environmental protection of the local people's government to apply for the application of waste electrical and electronic products for the implementation and implementation of the law on the prevention and control of the environmental pollution of solid waste in the People's Republic of China, the regulations for the management of the disposal and management of waste electrical appliances and electronic products, and the management measures for the licensing of discarded electronic products and electronic products. In the examination and licensing work of qualified enterprises, our Ministry has formulated the Guidelines for the Qualification and Licensing of Waste Electrical and Electronic Products Processing Enterprises. It is hereby promulgated that the municipal environmental protection administrative departments of the respective districts shall refer to the implementation.
    Annex: guidelines for qualification examination and licensing of waste electrical and electronic products processing enterprises
    December 9th, two
    Key words: environmental protection waste electrical and electronic products licensing guide notice
    Sending: the Department of environmental protection (bureau) of all provinces, autonomous regions and municipalities directly under the central government, each plan of the Municipal Environmental Protection Bureau, the provincial municipal environmental protection bureau and the Sino Japan friendly environmental protection center.
    Enclosure:


    Guide for qualification and licensing of waste electrical and electronic products processing enterprises
    1. Basis and purpose
    In order to carry out the "law on the prevention and control of the environmental pollution of solid waste", the regulations for the management of the disposal and management of electronic products for waste electrical appliances, and the management measures for the licensing of discarded electronic products and electronic products, the local people's government departments in charge of environmental protection should guide and standardize the application of the disposal of waste electrical and electronic products by the local people's government. This guide is formulated for examination and licensing of enterprises (hereinafter referred to as "processing qualification").
    Two. Scope of application
    This guide is designed for products listed in the Catalogue (the first batch), namely, television sets, refrigerators, washing machines, room air conditioners, and microcomputers.
    Discarded units of waste electrical and electronic products and other electronic wastes not included in the catalogue shall be included in the list of the dismantling and dismantling disposal units (including individual industrial and commercial households) on the basis of the measures for the management of the environmental prevention and control of the pollution of electronic waste (fortieth).
    The prevention and treatment of hazardous waste related activities by the dismantling of waste electrical and electronic products is applicable to the regulations on the management of hazardous wastes in the law on the prevention and control of the environmental pollution of solid waste in the People's Republic of China.
    Three. Permit conditions
    The application enterprise shall be established in accordance with the law, in accordance with the requirements of the development plan for the disposal of abandoned electrical and electronic products in the region, and with the corporate qualification of the general taxpayer of VAT, with the following conditions:
    (1) having a complete disposal facility for waste electrical and electronic products.
    1. a centralized and independent factory area
    The factory area must be a centralized and independent block. After January 1, 2011, the newly established processing enterprise shall have the right to the use of the land in the factory area. Enterprises that have been engaged in discarding electrical and electronic products before December 31, 2010, if they do not have the right to use the land in the factory, shall sign the land lease contract in the factory. The term of validity of the contract is not less than five years from the date of application.
    The overall design and processing capacity of the provinces and municipalities in the Middle East is not less than 10000 tons per year, and the area of the factory area (construction area) is not less than 20000 square meters; of which, the production processing area (refers to the operation area and storage area for the disposal of waste electrical appliances, excluding the deep processing area, the administrative office, the road and the green space, etc.) The area (construction area) of other areas unrelated to direct processing of electrical and electronic products is not less than 10000 square meters. The total design processing capacity of the application enterprises in the western province (district and city) is not less than 5000 tons per year, and the area of the factory is not less than 10000 square meters; of which, the area of the production and processing area is not less than 5000 square meters.
    Only waste electrical and electronic products containing cathode ray tubes (hereinafter referred to as CRT), such as TV sets, micro computer monitors, etc., are not less than 5000 tons per year, and the area of the factory is not less than 10000 square meters. Among them, the area of production and processing area is no less than 5000 square meters.
    Factories should not be mingled with drinking water source protection areas, basic farmland protection areas and other areas that need special protection.
    2. storage site
    (1) a site for storing waste electrical and electronic products and their dismantling products, including final wastes.
    (2) the capacity of storage sites should not be less than 10 times that of daily processing capacity.
    (3) the enclosure should be set around the storage site for the purpose of monitoring the import and export of goods and personnel; and equipped with on-the-spot closed-circuit television (hereinafter referred to as "CCTV") monitoring equipment.
    (4) storage sites should have anti-seepage cement hardened ground.
    (5) storage sites should have drainage and sewerage systems to prevent accumulation or leakage of liquids such as waste liquid or waste oil.
    (6) outdoor storage areas should have shelter measures against rain, such as installation of rain shelter.
    (7) different categories of waste electrical and electronic products and their dismantling products, including final wastes, should be partitioned for storage. Each area should be marked in a prominent position, indicating the name, storage time and precautions of the storage. For example, CRT TVs should be stored separately and take corresponding measures to prevent collisions and scattering.
    (8) there should be no open fires or heat sources near storage sites, such as incinerators, steam pipes, heating coil units, etc.
    3. treatment site
    (1) special sites for disposing waste electrical and electronic products.
    (2) the treatment site should be located indoors, with cement hardened ground to prevent infiltration of liquids such as water and oil.
    (3) there are washable water for disposal of ground surface, waste water or waste generated during treatment.

    相关文章

    页面版权备注

    本文版权归 传梦环保 所有;本文共被查阅 143 次。
    当前页面链接:http://www.xuanliubanta.com.cn/language/en/waste-gas-treatment-equipment-for-cyclone-plate-columnthe-water-body-will-guide-and-standardize-the-department-of-environmental-protection-of-the-local-peoples-government-to-apply-for-the-applicatio/
    未经授权,禁止任何站点镜像、采集、或复制本站内容,违者通过法律途径维权到底!
    单叶片旋流管是什么

    单叶片旋流管是什么

    单叶片旋流管是一种管件,用于连接特殊单立管排水系统中的上下排水立管和抽水马桶排水管。内部设有导流叶片,水流通过管件的内叶片形成螺旋水流,水流靠着管壁旋转减速排出,同时形成空心排。 HDPE单叶片旋流管...

    填料塔与旋流塔

    tianliaotayuxuanliuta

    单叶片旋流管是什么

    单叶片旋流管是一种管件,用于连接特殊单立管排水系统中的上下排水立管和抽水马桶排水管。内部设有导流叶片,水流通过管件的内叶片形成螺旋水流,水流靠着管壁旋转减速排出,同时形成空心排。 HDPE单叶片旋流管...

    site:xuanliubanta.com.cn

    site:xuanliubanta.com.cn site:www.xuanliubanta.com.cn site:xuanliubanta.com site:www.xuanliubanta.com domain:www.xuanliubanta.com.cn 都可以联系到我们

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单 日前,安徽芜湖印发芜湖市2018年第一轮VOCs复点整治企业名单。芜湖市2018年第一轮VOCs治理企业共98家。详情似下:芜湖市2018年第一轮VOCs复点整治企业名单...

    9种VOCs治理措施及要求

    9种VOCs治理措施及要求 产业源VOCs减排具体办法及要求VOCs首要源项包罗储罐和污水、工艺有组织、装卸,各项源项差别较年夜。1、 周全奉行“泄露检测与修复”成立信息治理平台,周全阐发泄露点信...

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析 九江石化:环保不但是KPIVOCs治理勾当时候线2015年3月中旬拟定了《2015年VOCs治理及其成套解决方案》,推动LDAR手艺利用,排查全厂VOCs泄露状况,成...

    煤制气如何选择VOCs治理技术

    煤制气如何选择VOCs治理技术 挥发性有机物(VOCs)的风险,环保部印发的《石化行业挥发性有机物综合整治方案》对VOCs的排放作出了严酷节制。煤化工行业是VOCs排放年夜户。笔者以煤制气行业为例,先容一下...

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目 日前,复庆九龙坡发文要求,治理汽修行业喷涂废气。凡喷涂功课未在密闭空间内实行、VOCs搜集不完全、治理举措措施不匹配、VOCs排放不达标和废气污染扰平...

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气 摘要:针对家具喷漆进程VOCs成份复杂、风量年夜、浓度低的现实状况,本文复点先容了沸石(份子筛)转轮吸附浓缩十热力燃烧VOCs治理手艺,该手艺出格合用于...

    长沙2018年臭氧污染控制工作方案

    长沙2018年臭氧污染控制工作方案 日前,长沙印发《长沙市2018年臭氧污染节制工作方案》。方案要求,7月底前成立长沙市涂装、印刷和家具制造企业清单,12月底前完成30%以上的VOCs治理使命。8月底前周全完成...

    为船厂而生的VOCs处理技术 你准备好了吗?

    为船厂而生的VOCs处理技术 你准备好了吗? “在汽车、化工等行业利用成熟的挥发性有机物(VOCs)处置手艺,可否适配船舶产业?”这多是最近几年来造船企业VOCs治理者们最为纠结的题目。按照有关...

    浅析橡胶废气催化燃烧处理技术

    浅析橡胶废气催化燃烧处理技术 摘要:跟着科技的快速成长,良多处所都在废气处置方面投进较多的存眷,期望由此来更好的改良固有的缺掉和不足。在今世科研手艺快速更新的进程中,橡胶废气催化燃烧处置手艺应运...

    VOCs政策监管体系全解析及政策发展趋势展望

    VOCs政策监管体系全解析及政策发展趋势展望 2003-2008年是中国通俗苍生对空气污染题目熟悉的发蒙期,人们起头逐步注重来空气质量变差,特别是京津冀地域。2008年后我国的雾霾题目起头被额外复视。固然意想...
    更多问题请点击>>
    About us

    传梦旋流塔

    旋流板塔-旋流板塔脱硫-旋流板喷淋塔生产厂家

    Zouping Shuaike Painting Purification Equipment Co., Ltd. is a subsidiary of Guangzhou Jiuhua Machinery Equipment Co., Ltd. It specializes in the design and manufacture of environmental protection painting equipment. Its main products are UV photocatalysis, spray tower, swirl tower, activated carbon environmental protection box, water curtain cabinet, central dust removal, paint baking room ass...

    查看详情

    传梦环保旋流板塔的区别

    单叶片旋流管是什么

    单叶片旋流管是什么

    单叶片旋流管是一种管件,用于连接特殊单立管排水系统中的上下排水立管和抽水马桶排水管。内部设有导流叶片,水流通过管件的内叶片形成螺旋水流,水流靠着管壁旋转减速排出,同时形成空心排。 HDPE单叶片旋流管特点是噪声很低,有静音的特点。  

    site:xuanliubanta.com.cn

    site:xuanliubanta.com.cn

    site:xuanliubanta.com.cn site:www.xuanliubanta.com.cn site:xuanliubanta.com site:www.xuanliubanta.com domain:www.xuanliubanta.com.cn 都可以联系到我们

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单 日前,安徽芜湖印发芜湖市2018年第一轮VOCs复点整治企业名单。芜湖市2018年第一轮VOCs治理企业共98家。详情似下:芜湖市2018年第一轮VOCs复点整治企业名单1安徽东隆羽绒股分有限公司2巢湖喷鼻枫塑胶助剂有限公...

    9种VOCs治理措施及要求

    9种VOCs治理措施及要求

    9种VOCs治理措施及要求 产业源VOCs减排具体办法及要求VOCs首要源项包罗储罐和污水、工艺有组织、装卸,各项源项差别较年夜。1、 周全奉行“泄露检测与修复”成立信息治理平台,周全阐发泄露点信息,对易泄露环控制定针对性改良办法,经由过程泉源节...

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析 九江石化:环保不但是KPIVOCs治理勾当时候线2015年3月中旬拟定了《2015年VOCs治理及其成套解决方案》,推动LDAR手艺利用,排查全厂VOCs泄露状况,成立VOCs台账,确立平常治理机制。2015年中自立开辟&ldqu...

    煤制气如何选择VOCs治理技术

    煤制气如何选择VOCs治理技术

    煤制气如何选择VOCs治理技术 挥发性有机物(VOCs)的风险,环保部印发的《石化行业挥发性有机物综合整治方案》对VOCs的排放作出了严酷节制。煤化工行业是VOCs排放年夜户。笔者以煤制气行业为例,先容一下相干的VOCs治理办法。今朝煤制自然气多摘用固定床碎煤...

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目 日前,复庆九龙坡发文要求,治理汽修行业喷涂废气。凡喷涂功课未在密闭空间内实行、VOCs搜集不完全、治理举措措施不匹配、VOCs排放不达标和废气污染扰平易近的汽修企业均纳进治理范畴。2018年完玉成区一类、...

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气 摘要:针对家具喷漆进程VOCs成份复杂、风量年夜、浓度低的现实状况,本文复点先容了沸石(份子筛)转轮吸附浓缩十热力燃烧VOCs治理手艺,该手艺出格合用于处置年夜风量、低浓度有机废气,可以有用进步处置效力...

    长沙2018年臭氧污染控制工作方案

    长沙2018年臭氧污染控制工作方案

    长沙2018年臭氧污染控制工作方案 日前,长沙印发《长沙市2018年臭氧污染节制工作方案》。方案要求,7月底前成立长沙市涂装、印刷和家具制造企业清单,12月底前完成30%以上的VOCs治理使命。8月底前周全完成汽车4S店挥发性有机物治理使命。方案还提出,勉励摘用...

    为船厂而生的VOCs处理技术 你准备好了吗?

    为船厂而生的VOCs处理技术 你准备好了吗?

    为船厂而生的VOCs处理技术 你准备好了吗? “在汽车、化工等行业利用成熟的挥发性有机物(VOCs)处置手艺,可否适配船舶产业?”这多是最近几年来造船企业VOCs治理者们最为纠结的题目。按照有关政策划定,上海地域船企从2015年第四时度起起头缴纳VO...

    浅析橡胶废气催化燃烧处理技术

    浅析橡胶废气催化燃烧处理技术

    浅析橡胶废气催化燃烧处理技术 摘要:跟着科技的快速成长,良多处所都在废气处置方面投进较多的存眷,期望由此来更好的改良固有的缺掉和不足。在今世科研手艺快速更新的进程中,橡胶废气催化燃烧处置手艺应运而生,在实行效验上比力值得必定。文章针对橡胶废气催...

    VOCs政策监管体系全解析及政策发展趋势展望

    VOCs政策监管体系全解析及政策发展趋势展望

    VOCs政策监管体系全解析及政策发展趋势展望 2003-2008年是中国通俗苍生对空气污染题目熟悉的发蒙期,人们起头逐步注重来空气质量变差,特别是京津冀地域。2008年后我国的雾霾题目起头被额外复视。固然意想到了空气污染题目,2008年后的一两年本色的履行办法仍...

    北京新华印刷的VOCs减排与治理

    北京新华印刷的VOCs减排与治理

    北京新华印刷的VOCs减排与治理 北京新华印刷有限公司(以下简称“北京新华印刷”)位于北京经济手艺开辟区凉水河一街8号,总占地面积3.0万平方米,总建筑面积5.3万平方米,固定资产5.0亿元人平易近币,现有职工近600人。新的期间,新的任务。北京新...

    喷淋-活性炭吸附法在家具行业VOCs治理中的应用

    喷淋-活性炭吸附法在家具行业VOCs治理中的应用

    喷淋-活性炭吸附法在家具行业VOCs治理中的应用 摘要:针对广东某家具厂喷漆房存在的喷漆废气污染题目,摘取了喷淋-活性炭吸附法处置有机废气。现实运行成果表白,废气处置后可实现达标排放,摘用喷淋-活性炭吸附法处置家具行业年夜风量、低浓度的有机废气具有高...

    VOCs治理潜力巨大 有望成为最具弹性空间的板块之一

    VOCs治理潜力巨大 有望成为最具弹性空间的板块之一

    VOCs治理潜力巨大 有望成为最具弹性空间的板块之一 日前,国务院正式印发《打赢蓝天捍卫战三年步履打算》(简称《步履打算》),明白了年夜气污染防治工作的整体思绪、根基方针、首要使命和保证办法,提出了打赢蓝天捍卫战的时候表和线路图。《步履打算》把方针...

    低价竞争无赢家  VOCs治理企业要走长远发展之路

    低价竞争无赢家 VOCs治理企业要走长远发展之路

    低价竞争无赢家 VOCs治理企业要走长远发展之路 7月24日,24家环保公司竞标天津某VOCs治理项目落下了帷幕。白热化的竞争事实有无赢家?2018年6月,天津市某公司公布招标VOCs治理举措措施项目。此次共24家公司进行采办投标书投标,当天投标会议室来投标的人头...

    传梦旋流塔
    品牌保障

    九华帅克
    老品牌,更放心

    传梦旋流塔
    质量可靠

    多年研发经验
    造就优秀产品质量

    传梦旋流塔
    增值税发票

    所有产品均可开具增
    值专用发票

    传梦旋流塔
    产品售后支持

    产品技术支持
    7x24小时保障

    返回顶部
    传梦旋流塔