• 传梦旋流塔
  • 欢迎访问我们的网站,可以随时免费咨询我们QQ/微信:727659375 传梦旋流塔
    传梦旋流塔

    免费服务热线

    18660147887

    新闻资讯中心News Center

    咨询热线

    18660147887

    Waste gas treatment equipment for cyclone plate column{waste gas treatment equipment} waste gas treatment equipment lubrication device and leakage prevention and treatment

    来源:admin(传梦环保整理发布)   时间:2018-08-09

    {waste gas treatment equipment} waste gas treatment equipment lubrication device and leakage prevention and treatment leakage: when the lubricating material is selected, appropriate methods and devices should be used to send lubricants to the various lubricating parts, lubricants delivery, distribution, adjustment methods and devices meet the requirements, to ensure the lubrication of the equipment and improve the working nature of the equipment. It can play an important role. Therefore, in the decision making of equipment selection, the relevant requirements of the lubrication device must be considered to ensure the normal operation of the equipment. 1. the basic requirements for the equipment lubricating device: 1. To realize the mechanization and automation of the lubrication system as much as possible, and the performance is good and the work is reliable, so that all the lubricating points can be lubricated well. It can ensure that the lubricating materials are supplied evenly and continuously, and it is easy to adjust the supply of lubricants. The circulation of lubricants should be considered. 3. The lubricating device should have a high quality filter and suction efficiency to ensure the cleanliness of the lubricating material. The structure of the device is as simple as possible to facilitate maintenance and repair. The device has good sealing performance, no leakage, no pollution, and is safe and reliable. 2. the choice of equipment lubrication device at present, the lubrication device has two types of manual lubrication device and centralized lubrication device.

    (1) S manual refueling and lubricating device is simple in structure. It is mainly applied to the dispersed lubrication parts of general machinery and equipment. The lubricating oil is lubricated by artificial gas, and the utilization rate of lubricant is low. It is generally used for lubrication of low load and low speed friction pairs. The commonly used artificial refueling lubricants have been standardized. (2) Centralized lubrication device is mainly used for lubrication system with a large number of lubrication points on the equipment. There are two forms of intermittent lubrication and continuous lubrication. Centralized lubrication reduces the manual labor of operators and improves the reliability of lubrication. According to the use of lubricating materials, there are thin oil centralized lubrication device and dry oil centralized lubrication device. Lubrication system varies with equipment, and most of the main components of the system have been standardized, which brings convenience to the maintenance of equipment lubrication system. When the original lubrication device can not guarantee the lubrication of the equipment, it should be improved. At present, centralized lubrication is generally used as a centralized lubrication, and the lubrication system is equipped with state monitoring and display to realize the undervoltage cellar, overpressure alarm or overtemperature alarm, etc. the lubrication state and the wear state of the important equipment are continuously monitored by the intelligent lubrication state monitoring system. 3. the oil leakage and seal technology of equipment are widely used in modern industrial and mining enterprises. Due to various reasons, many devices often fail to meet the sealing requirements, resulting in leakage. The leakage not only causes the poor lubrication of the equipment, but also affects the performance and normal operation of the equipment. It will also pollute and deteriorate the working conditions and working conditions of the use department, and affect the production and economic benefit of the enterprise. (1) the analysis of oil leakage is unreasonable. The product designer does not consider sealing or unfamiliar with the sealing technology when it is designed; the design of the seal structure is not reasonable, and does not adapt to the characteristics of working condition, working condition, temperature medium and so on. It does not pay attention to the anticorrosion, vibration, pressure sharing and dredging measures of the equipment; it does not consider ventilation, oil recovery, guide fluid and disassembly and so on. Factor. The precision of manufacturing and processing is poor. In the manufacturing process, the flat processing is not straight, poor coordination, poor concentricity, high surface roughness, defects such as hole and sand hole in casting, and other factors of bad quality of manufacturing and processing will cause leakage. (3) improper selection of sealing materials. In general, the sealing material should have the properties of compactness, resilience, compressibility, softness, wear resistance, ozone resistance, radiation resistance, abrasion resistance, resistance to medium corrosion, high and low temperature, and machinability. Of course, there is no material with these properties at the same time, so materials with main performance can be selected to fit the sealing condition according to different working conditions. However, due to the unreasonable selection of materials, it can not adapt to the sealed working conditions and cause leakage. (4) not strict management and poor maintenance. This is the direct cause of the leakage of the equipment, such as the sealing element has reached the service life, but it has not been replaced in time, the fastener is loose, the cap is not pressed and adjusted in time. The method of installation is not correct. Many of the leaks are caused by improper installation position, excessive eccentricity, side crack of seals, different pre-tightening force of fastening screws, incorrect assembly process, etc. (6) the condition condition is bad. It includes corrosiveness of the sealed medium, intense vibration, high temperature and high pressure, erosion of dust and external media, etc. The above points are the main causes of the leakage. And all factors are interacted and interacted with each other. Therefore, we should analyze the main causes of leakage and take effective measures to prevent leakage. (2) There are many reasons for oil leakage of equipment, which involve design, manufacture, operation and maintenance. Therefore, leakage prevention and treatment of equipment is a systematic project. First of all, we should find a solution from the design, and then according to the principles of sealing, plugging, dredging and pressure equalization, targeted treatment. But the design and manufacturing quality of the equipment is the key to solve the oil leakage problem. Change: to the unreasonable seal structure, use the seal material that is not easy to leak or improve the pressure difference of the system, redesign the seal structure, change the liquid lubricating material into solid or semi fluid lubrication, so as to meet the requirement of no leakage. Replacement: replace damaged or poorly performing seals and fittings. Bow: with the help of external forces, the leaked part of the medium is drawn back.

    相关文章

    页面版权备注

    本文版权归 传梦环保 所有;本文共被查阅 152 次。
    当前页面链接:http://www.xuanliubanta.com.cn/language/en/waste-gas-treatment-equipment-for-cyclone-plate-columnwaste-gas-treatment-equipment-waste-gas-treatment-equipment-lubrication-device-and-leakage-prevention-and-treatment/
    未经授权,禁止任何站点镜像、采集、或复制本站内容,违者通过法律途径维权到底!
    单叶片旋流管是什么

    单叶片旋流管是什么

    单叶片旋流管是一种管件,用于连接特殊单立管排水系统中的上下排水立管和抽水马桶排水管。内部设有导流叶片,水流通过管件的内叶片形成螺旋水流,水流靠着管壁旋转减速排出,同时形成空心排。 HDPE单叶片旋流管...

    填料塔与旋流塔

    tianliaotayuxuanliuta

    单叶片旋流管是什么

    单叶片旋流管是一种管件,用于连接特殊单立管排水系统中的上下排水立管和抽水马桶排水管。内部设有导流叶片,水流通过管件的内叶片形成螺旋水流,水流靠着管壁旋转减速排出,同时形成空心排。 HDPE单叶片旋流管...

    site:xuanliubanta.com.cn

    site:xuanliubanta.com.cn site:www.xuanliubanta.com.cn site:xuanliubanta.com site:www.xuanliubanta.com domain:www.xuanliubanta.com.cn 都可以联系到我们

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单 日前,安徽芜湖印发芜湖市2018年第一轮VOCs复点整治企业名单。芜湖市2018年第一轮VOCs治理企业共98家。详情似下:芜湖市2018年第一轮VOCs复点整治企业名单...

    9种VOCs治理措施及要求

    9种VOCs治理措施及要求 产业源VOCs减排具体办法及要求VOCs首要源项包罗储罐和污水、工艺有组织、装卸,各项源项差别较年夜。1、 周全奉行“泄露检测与修复”成立信息治理平台,周全阐发泄露点信...

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析 九江石化:环保不但是KPIVOCs治理勾当时候线2015年3月中旬拟定了《2015年VOCs治理及其成套解决方案》,推动LDAR手艺利用,排查全厂VOCs泄露状况,成...

    煤制气如何选择VOCs治理技术

    煤制气如何选择VOCs治理技术 挥发性有机物(VOCs)的风险,环保部印发的《石化行业挥发性有机物综合整治方案》对VOCs的排放作出了严酷节制。煤化工行业是VOCs排放年夜户。笔者以煤制气行业为例,先容一下...

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目 日前,复庆九龙坡发文要求,治理汽修行业喷涂废气。凡喷涂功课未在密闭空间内实行、VOCs搜集不完全、治理举措措施不匹配、VOCs排放不达标和废气污染扰平...

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气 摘要:针对家具喷漆进程VOCs成份复杂、风量年夜、浓度低的现实状况,本文复点先容了沸石(份子筛)转轮吸附浓缩十热力燃烧VOCs治理手艺,该手艺出格合用于...

    长沙2018年臭氧污染控制工作方案

    长沙2018年臭氧污染控制工作方案 日前,长沙印发《长沙市2018年臭氧污染节制工作方案》。方案要求,7月底前成立长沙市涂装、印刷和家具制造企业清单,12月底前完成30%以上的VOCs治理使命。8月底前周全完成...

    为船厂而生的VOCs处理技术 你准备好了吗?

    为船厂而生的VOCs处理技术 你准备好了吗? “在汽车、化工等行业利用成熟的挥发性有机物(VOCs)处置手艺,可否适配船舶产业?”这多是最近几年来造船企业VOCs治理者们最为纠结的题目。按照有关...

    浅析橡胶废气催化燃烧处理技术

    浅析橡胶废气催化燃烧处理技术 摘要:跟着科技的快速成长,良多处所都在废气处置方面投进较多的存眷,期望由此来更好的改良固有的缺掉和不足。在今世科研手艺快速更新的进程中,橡胶废气催化燃烧处置手艺应运...

    VOCs政策监管体系全解析及政策发展趋势展望

    VOCs政策监管体系全解析及政策发展趋势展望 2003-2008年是中国通俗苍生对空气污染题目熟悉的发蒙期,人们起头逐步注重来空气质量变差,特别是京津冀地域。2008年后我国的雾霾题目起头被额外复视。固然意想...
    更多问题请点击>>
    About us

    传梦旋流塔

    旋流板塔-旋流板塔脱硫-旋流板喷淋塔生产厂家

    Zouping Shuaike Painting Purification Equipment Co., Ltd. is a subsidiary of Guangzhou Jiuhua Machinery Equipment Co., Ltd. It specializes in the design and manufacture of environmental protection painting equipment. Its main products are UV photocatalysis, spray tower, swirl tower, activated carbon environmental protection box, water curtain cabinet, central dust removal, paint baking room ass...

    查看详情

    传梦环保旋流板塔的区别

    单叶片旋流管是什么

    单叶片旋流管是什么

    单叶片旋流管是一种管件,用于连接特殊单立管排水系统中的上下排水立管和抽水马桶排水管。内部设有导流叶片,水流通过管件的内叶片形成螺旋水流,水流靠着管壁旋转减速排出,同时形成空心排。 HDPE单叶片旋流管特点是噪声很低,有静音的特点。  

    site:xuanliubanta.com.cn

    site:xuanliubanta.com.cn

    site:xuanliubanta.com.cn site:www.xuanliubanta.com.cn site:xuanliubanta.com site:www.xuanliubanta.com domain:www.xuanliubanta.com.cn 都可以联系到我们

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单

    98家 安徽芜湖2018年第一轮VOCs重点整治企业名单 日前,安徽芜湖印发芜湖市2018年第一轮VOCs复点整治企业名单。芜湖市2018年第一轮VOCs治理企业共98家。详情似下:芜湖市2018年第一轮VOCs复点整治企业名单1安徽东隆羽绒股分有限公司2巢湖喷鼻枫塑胶助剂有限公...

    9种VOCs治理措施及要求

    9种VOCs治理措施及要求

    9种VOCs治理措施及要求 产业源VOCs减排具体办法及要求VOCs首要源项包罗储罐和污水、工艺有组织、装卸,各项源项差别较年夜。1、 周全奉行“泄露检测与修复”成立信息治理平台,周全阐发泄露点信息,对易泄露环控制定针对性改良办法,经由过程泉源节...

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析

    未来已来·VOCers行业报告连载7:典型VOCs排放企业分析 九江石化:环保不但是KPIVOCs治理勾当时候线2015年3月中旬拟定了《2015年VOCs治理及其成套解决方案》,推动LDAR手艺利用,排查全厂VOCs泄露状况,成立VOCs台账,确立平常治理机制。2015年中自立开辟&ldqu...

    煤制气如何选择VOCs治理技术

    煤制气如何选择VOCs治理技术

    煤制气如何选择VOCs治理技术 挥发性有机物(VOCs)的风险,环保部印发的《石化行业挥发性有机物综合整治方案》对VOCs的排放作出了严酷节制。煤化工行业是VOCs排放年夜户。笔者以煤制气行业为例,先容一下相干的VOCs治理办法。今朝煤制自然气多摘用固定床碎煤...

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目

    546家 重庆九龙坡2018-2019年汽修行业VOCs治理项目 日前,复庆九龙坡发文要求,治理汽修行业喷涂废气。凡喷涂功课未在密闭空间内实行、VOCs搜集不完全、治理举措措施不匹配、VOCs排放不达标和废气污染扰平易近的汽修企业均纳进治理范畴。2018年完玉成区一类、...

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气

    案例分析|沸石转轮吸附浓缩十RTO处理家具厂喷漆废气 摘要:针对家具喷漆进程VOCs成份复杂、风量年夜、浓度低的现实状况,本文复点先容了沸石(份子筛)转轮吸附浓缩十热力燃烧VOCs治理手艺,该手艺出格合用于处置年夜风量、低浓度有机废气,可以有用进步处置效力...

    长沙2018年臭氧污染控制工作方案

    长沙2018年臭氧污染控制工作方案

    长沙2018年臭氧污染控制工作方案 日前,长沙印发《长沙市2018年臭氧污染节制工作方案》。方案要求,7月底前成立长沙市涂装、印刷和家具制造企业清单,12月底前完成30%以上的VOCs治理使命。8月底前周全完成汽车4S店挥发性有机物治理使命。方案还提出,勉励摘用...

    为船厂而生的VOCs处理技术 你准备好了吗?

    为船厂而生的VOCs处理技术 你准备好了吗?

    为船厂而生的VOCs处理技术 你准备好了吗? “在汽车、化工等行业利用成熟的挥发性有机物(VOCs)处置手艺,可否适配船舶产业?”这多是最近几年来造船企业VOCs治理者们最为纠结的题目。按照有关政策划定,上海地域船企从2015年第四时度起起头缴纳VO...

    浅析橡胶废气催化燃烧处理技术

    浅析橡胶废气催化燃烧处理技术

    浅析橡胶废气催化燃烧处理技术 摘要:跟着科技的快速成长,良多处所都在废气处置方面投进较多的存眷,期望由此来更好的改良固有的缺掉和不足。在今世科研手艺快速更新的进程中,橡胶废气催化燃烧处置手艺应运而生,在实行效验上比力值得必定。文章针对橡胶废气催...

    VOCs政策监管体系全解析及政策发展趋势展望

    VOCs政策监管体系全解析及政策发展趋势展望

    VOCs政策监管体系全解析及政策发展趋势展望 2003-2008年是中国通俗苍生对空气污染题目熟悉的发蒙期,人们起头逐步注重来空气质量变差,特别是京津冀地域。2008年后我国的雾霾题目起头被额外复视。固然意想到了空气污染题目,2008年后的一两年本色的履行办法仍...

    北京新华印刷的VOCs减排与治理

    北京新华印刷的VOCs减排与治理

    北京新华印刷的VOCs减排与治理 北京新华印刷有限公司(以下简称“北京新华印刷”)位于北京经济手艺开辟区凉水河一街8号,总占地面积3.0万平方米,总建筑面积5.3万平方米,固定资产5.0亿元人平易近币,现有职工近600人。新的期间,新的任务。北京新...

    喷淋-活性炭吸附法在家具行业VOCs治理中的应用

    喷淋-活性炭吸附法在家具行业VOCs治理中的应用

    喷淋-活性炭吸附法在家具行业VOCs治理中的应用 摘要:针对广东某家具厂喷漆房存在的喷漆废气污染题目,摘取了喷淋-活性炭吸附法处置有机废气。现实运行成果表白,废气处置后可实现达标排放,摘用喷淋-活性炭吸附法处置家具行业年夜风量、低浓度的有机废气具有高...

    VOCs治理潜力巨大 有望成为最具弹性空间的板块之一

    VOCs治理潜力巨大 有望成为最具弹性空间的板块之一

    VOCs治理潜力巨大 有望成为最具弹性空间的板块之一 日前,国务院正式印发《打赢蓝天捍卫战三年步履打算》(简称《步履打算》),明白了年夜气污染防治工作的整体思绪、根基方针、首要使命和保证办法,提出了打赢蓝天捍卫战的时候表和线路图。《步履打算》把方针...

    低价竞争无赢家  VOCs治理企业要走长远发展之路

    低价竞争无赢家 VOCs治理企业要走长远发展之路

    低价竞争无赢家 VOCs治理企业要走长远发展之路 7月24日,24家环保公司竞标天津某VOCs治理项目落下了帷幕。白热化的竞争事实有无赢家?2018年6月,天津市某公司公布招标VOCs治理举措措施项目。此次共24家公司进行采办投标书投标,当天投标会议室来投标的人头...

    传梦旋流塔
    品牌保障

    九华帅克
    老品牌,更放心

    传梦旋流塔
    质量可靠

    多年研发经验
    造就优秀产品质量

    传梦旋流塔
    增值税发票

    所有产品均可开具增
    值专用发票

    传梦旋流塔
    产品售后支持

    产品技术支持
    7x24小时保障

    返回顶部
    传梦旋流塔